Click for Home
             
             
Click for Home Click for Profile Click for Products Click for Email Click for Resources Click for Feedback Click for Downloads
Click for Manufacturing site
Click for Export World
Click for Contact us
Click for Site Map
Click for FAQ
Click for Packaging Information
 :: Specifications  :: Camera-mount  :: ISO Fine Thread  :: ISO Coarse Thread
 :: PG Thread  :: S. & H. Thread  :: Edison Thread  :: Valve Thread
 :: Sewing-machine Thread  :: Cycle Thread  :: C. E. I. Thread  :: Löwenherz Thread
 :: Bodmer Thread  :: VDI Thread  :: French Thread  :: Knuckle Thread DIN 405
 :: Knuckle Thread DIN  20400  :: Buttress Fine Thread  :: Buttress Coarse Thread  :: Trapezoidal Fine Thread
 :: Trapezoidal Coarse Thread   :: NPT Thread (USA)  :: NPTF Thread (USA)  :: UNC Thread (USA)
 :: UNEF Thread   :: UNF Thread :: 8-UN Thread (USA)  :: 12-UN Thread (USA)
 ::16-UN Thread (USA)  :: Sharp V Thread (USA)  :: BA British Association (GB)  :: BSF Whitworth Fine Thread(GB)
 :: BSW Whitworth Coarse Thread(GB)  :: BSP Whitworth Pipe Thread(GB)  :: BSPT Tapered Whit - worth Pipe Thread(GB)  :: Conversion Inch-Fractals to mm


VDI Thread

Specifications of International Thread Standards

            PIn 1876 Karl Deliste suggested this thread and it was accepted by the VDI (Verein Deutscher Ingenieure) in Breslau 1888. However, this thread was replaced by the S.I.-Thread on the International Congress named "Internationaler Kongress zur Vereinheitlichung der Gewinde" which took place on 3rd and 4th October 1898 and is no longer used.                 

Major Diameter
mm
Pitch
mm
Tapping
Drill Size
mm
Wrench Size
mm
6,00 1,00 4,50 11
7,00 1,10 5,35 14
8,00 1,20 6,20 14
9,00 1,30 7,05 18
10,00 1,40 7,90 18
12,00 1,60 9,60 22
14,00 1,80 11,30 25
16,00 2,00 13,00 28
18,00 2,20 14,70 31
20,00 2,40 16,40 34
22,00 2,80 17,80 37
24,00 2,80 19,80 40
26,00 3,20 21,20 43
28,00 3,20 23,20 46
30,00 3,60 24,60 49
32,00 3,60 26,60 52
36,00 4,00 30,00 58
40,00 4,40 33,40 64

VDI Thread
© 1998 Conex Metals.

+ +