Copper Alloy No. C93500

High Leaded Tin Bronze SAE 66 , CDA 935 , 85-5-9-1

ASTM B 505 , ASTM B 271

Chemical Composition % by weight

 

Element	Nominal	Minimum	Maximum
Aluminum	-	-	.005
Antimony	-	-	.30
Copper	84.5	83	86
Iron	-	-	.20
Lead	9	8	10
Nickel	-	-	1
Phosphorus	-	-	.05
Silicon	-	-	.005
Sulfur	-	-	.08
Tin	5.15	4.3	6
Zinc	-	-	2

 

Applications

Bearings, bushings.

Hardness	Brinell Hardness (500 kg load)	60
Tensile Strength**	KSI	30 min
Yield Strength **	KSI (0.5% Ext. under load)	16 min
Elongation**	% in 2 inch	12

**Test values are nominal approximations and depend on specimen size and orientation.

Physical Properties

Thermal Conductivity	BTU/ (sq ft-ft-hr-F)	40.7
Specific Heat	BTU/lb/ºF @ 68F	.09
Thermal Expansion	Per °F from 68 F to 392 F	.0000099
Density	lb/cu in @ 68 F	.320
Electrical Conductivity* (Annealed)	% IACS @ 68 F	15
Modulus of Elasticity	KSI	14,500

*Volume basis

Stress relieving temperature	500 F or 260 C
Time at temperature	1 hour per inch of section thickness
Responds to heat treatment	No
Machinability rating (Free Cutting Brass=100)	70
Suitability for being joined by:	Soldering/Good
	Brazing/Good*
	Oxyacetylene Welding/Not Recommended
	Gas Shielded Arc Welding/Not Recommended
	Coated Metal Arc Welding/Not Recommended

*Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.

The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.

Our External Links